研究テーマ

List of Publications（発表論文リスト）2008～

Filter: Japanese | English | All
Jump to year: 2011 | 2010 | 2009 | 2008 | 2007

2011

Journal Publications

  • H. Sakamoto, Y. Miyazaki, and O. Mori, "Transient Dynamic Analysis of Gossamer Appendage Deployment Using Nonlinear Finite Element Method", Journal of Spacecraft and Rockets, Vol. 48, No. 5, Sept.-Oct. 2011, pp. 881-890.
Back to top

Review Article

  • 坂本啓, 「えあろすぺーすABC【基礎・応用編】膜構造」, 日本航空宇宙学会誌, Vol. 59, No. 689, 2011年6月.
    • Back to top

Presentations

  • 坂本啓, N. Ragosta, 大熊政明, 「膜構造の展開挙動の有限要素解析とその妥当性確認」, No. 1B08, 第55回宇宙科学技術連合講演会, 愛媛県松山市, 2011年11月30日-12月2日.
  • 伊藤琢博, 山田皓司, 坂本啓, 神武直彦, 白坂成功, 成田伸一郎, 「Cansat開発におけるシステムズ・エンジニアリング教育の効果」, No. 2J05, 第55回宇宙科学技術連合講演会, 愛媛県松山市, 2011年11月30日-12月2日.
  • 小木曽望, 田中宏明, 秋田剛, 石村康生, 坂本啓, 荻芳郎, 宮崎康行, 岩佐貴史,「衛星搭載用アンテナ構造設計のためのFEM 数値解の精度比較」, 日本機械学会第24回計算力学講演会（CMD2011）, No. 2328, 岡山県岡山市, 2011年10月8-10日.
  • 小木曽望, 上馬場雄太, 岡田侑樹, 坂本啓, 「ブートストラップ法を用いた宇宙構造物の不確定性推定について」, 日本機械学会2011年度年次大会, J191013, 東京都目黒区, 2011年9月12-14日.
  • 中園利之, 小澤直樹, R. Kloepper, 大熊政明, 「柔軟懸架式に基づく低剛性構造物の高精度剛体特性同定法の開発」, Dynamics and Design Conference, No. 713, 高知県香美市, 2011年9月5-9日.
  • R. Kloepper, 川口卓志, A. Mitritz, T. Gingold, R. Slusarz, 大熊政明, 「自由振動の振動数参照による剛体特性の高精度同定法の開発」, Dynamics and Design Conference, No. 718, 高知県香美市, 2011年9月5-9日.
  • (Poster) N. H. Ragosta, H. Sakamoto, and M. Okuma, "Investigating Solar Sail Membrane Deployment," P-7, presented at 3rd Multidisciplinary International Student Workshop in Tokyo Tech, Tokyo, Japan, Aug. 4-5, 2011.
  • (Poster) Y. Hui, L. Luming, and M. Okuma, "Research on an astronaut body mass measurement device and effect of off-center of human body," P-8, presented at 3rd Multidisciplinary International Student Workshop in Tokyo Tech, Tokyo, Japan, Aug. 4-5, 2011.
  • H. Sakamoto, N. Kohtake, S. Shirasaka, K. Yamada, Y. Sudo, S. Toki, and Y. Kakehashi, "Introduction of Systems Engineering to Cansat Project - Construction of PBL-type Educational Program -," ISTS 2011-t-14, presented at the 28th International Symposium on Space Technology and Science (ISTS), Okinawa, Japan, June 2011.
  • K. Yamada, Y. Sudo, S. Toki, Y. Kakehashi, H. Sakamoto, N. Kohtake, and S. Shirasaka, "Practical Application of Systems Engineering to Cansat Project - Operation of PBL-type Educational Program in Seven Universities in Japan -," ISTS 2011-t-15, presented at the 28th International Symposium on Space Technology and Science (ISTS), Okinawa, Japan, June 2011.
  • H. Sakamoto, Y. Okada, and N. Kogiso, "Finite Element Model Updating for Tension-Stabilized Flexible Space Structures," ISTS 2011-c-48, presented at the 28th International Symposium on Space Technology and Science (ISTS), Okinawa, Japan, June 2011.
  • Y. Miyazaki, H. Sakamoto, Y. Shirasawa, O. Mori, H. Sawada, M. Yamazaki, and IKAROS demonstration team, "Finite Element Analysis of Deployment of Sail Membrane of IKAROS," ISTS 2011-o-4-06v, presented at the 28th International Symposium on Space Technology and Science (ISTS), Okinawa, Japan, June 2011.
  • H. Sakamoto, Y. Shirasawa, H. Sawada, D. Haraguchi, and O. Mori, "A Spin-up Control Scheme for Contingency Deployment of the Sailcraft IKAROS," AIAA 2011-1892, presented at the 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Material Conference, Denver, CO, USA, 4-7 April 2011.
  • O. Mori, Y. Shirasawa, Y. Miyazaki, H. Sakamoto, M. Hasome, N. Okuizumi, H. Sawada, H. Furuya, S. Matunaga, M. C. Natori, and J. Kawaguchi, "Deployment and Steering Dynamics of Spinning Solar Sail ‘IKAROS," 22nd International Symposium on Space Flight Dynamics, Sao Jose dos Campos, Brazil, Feb.28-March 4, 2011.
Back to top

2010

Presentations

  • R. Kloepper, H. Akita, M. Okuma, and S. Terada, "An Experimental Identification Method for Rigid Body Properties Enabled by Gravity-Dependent Suspension Modelling," presented at the 1st Joint International Conference on Multibody System Dynamics, June 10, 2010.
  • D. Haraguchi, H. Sakamoto, Y. Shirasawa, and O. Mori, “Design criteria for spin deployment of gossamer structures considering nutation dynamics,” AIAA 2010-8072, presented at AIAA Guidance, Navigation, and Control Conference, Toronto, Ontario, Canada, Aug. 2-5, 2010.
  • 秋田啓仁, R. Kloepper, 寺田聖一, 中園利之, 坂本啓, 大熊政明, 「高精度な剛体特性同定法の開発に関する研究」, No. 114, Dynamics and Design Conference 2010, 京都府京田辺市, 2010年9月14-18日.
  • 中園利之, 人位智大, R. Kloepper, 大熊政明,「複数ばね支持による低剛性構造物の剛体特性同定の高精度化に関する研究」, No. 115, Dynamics and Design Conference 2010, 京都府京田辺市, 2010年9月14-18日.
  • 姜範錫, 瀬川周平, 坂本啓, 大熊政明, 「柔軟多孔質材と液体による制振材開発のための基礎的研究」, No. 531, Dynamics and Design Conference 2010, 京都府京田辺市, 2010年9月14-18日.
  • 坂本啓, 原口大輔, 白澤洋次, 森治, 「数値動解析に基づくIKAROSセイル膜の一気展開の制御則の構築」, No. 2S10, 第54回宇宙科学技術連合講演会, 静岡県静岡市, 2010年11月17-19日.
  • 白澤洋次, 坂本啓, 澤田弘崇, 奥泉信克, 森治, 羽染円絵, 「IKAROSセイル膜の一次展開シミュレーションと軌道上結果」, No. 2S07, 第54回宇宙科学技術連合講演会, 静岡県静岡市, 2010年11月17-19日.
  • 神武直彦, 坂本啓, 白坂成功, 山田皓司, 須藤雄哉, 土岐周平, 梯友哉, 「Cansat開発におけるシステムズ・エンジニアリングの適用 ～PBL型教育プログラムの構築～」, No. 3E05, 第54回宇宙科学技術連合講演会, 静岡県静岡市, 2010年11月17-19日.
  • 山田皓司, 須藤雄哉, 土岐周平, 梯友哉, 坂本啓, 神武直彦, 白坂成功, 「Cansat開発におけるシステムズ・エンジニアリングの実践 ～全国7大学におけるPBL型教育プログラムの実践～」, No. 3E06, 第54回宇宙科学技術連合講演会, 静岡県静岡市, 2010年11月17-19日.
  • 田中宏明, 森島駿一, 岡田侑樹, 池田忠繁, 坂本啓, 秋田剛, 荻芳郎, 石村康生, 樋口健, 「スマート構造システムの低温低圧環境試験」, No. 1K06, 第54回宇宙科学技術連合講演会, 静岡県静岡市, 2010年11月17-19日.
  • R. Kloepper, 「剛体特性の完全自動高精度同定法システム」, 第8回試験技術ワークショップ（主催：JAXA環境試験技術センター）, 茨城県つくば市, 2010年11月12日.
  • 田中宏明, 森島駿一, 岡田侑樹, 池田忠繁, 坂本啓, 秋田剛, 荻芳郎, 石村康生, 樋口健, 「スマート構造システムの低温低圧環境における有効性実証試験」, No. B11, 第26回宇宙構造・材料シンポジウム, 神奈川県相模原市, 2010年12月10日.
Back to top

Invited Lectures

  • M. Okuma, "Indonesia-Japan Cooperation on Create Innovative Human Resources for Sustainable Development", One-day Seminar on Indonesia-Japan Cooperation in Higher Education organized by Indonesian Student Association in Japan under the support of Embassy of Indonesia, March 10, 2010.
  • M. Okuma, "Old but still hot research: Rigid-body property identification and squeal noise prediction," 2nd International Conference on Vibro-Impact Systems, 6-9, Jan. 2010.
  • M. Okuma, "Importance of rigid-body property identification," 1st International Conference on Mechanical Engineering (TSME-ICoME), Oct. 2010, Thailand.
Back to top

Books

  • 大熊政明, 「新・演習 工業力学」, 数理工学社, ISBN978-4-901683-75-3, 2010.
Back to top

2009

Journal Publications

  • R. Kloepper and M. Okuma, "Elimination of bias errors due to suspension effects in FRF-based rigid body property identification," ASME Journal of Dynamic Systems, Measurement, and Control, 131(4):041005, 2009.
  • R. Kloepper and M. Okuma, "Experimental identification of rigid body inertia properties using single-rotor unbalance excitation," IMechE Journal of Multi-Body Dynamics, 2009, 223(K4), pages 293-308, 2009.
  • 高橋真史, 梶原逸朗, 有坂寿洋, "HDDにおけるサーボの高性能化を目指したスマート構造の最適設計," 日本機械学会論文集（C編）, 75巻, 753号, 2009, pp. 1369-1376.
  • I. Kajiwara, M. Takahashi, et al., "Optimization of Smart Structure for Improving Servo Performance of Hard Disk Drive," Journal of System Design and Dynamics, Vol. 3, No. 6, 2009, pp. 906-917.
  • M. Okuma, "Low frequency noise and vibration analysis of boat based on experiment-based substructure modeling and synthesis," Lecture Notes in Applied and Computational Mechanics, Vol. 44, 2009, pp. 203-214.
Back to top

Presentations

  • H. Sakamoto, Y. Miyazaki, and O. Mori, "Finite element dynamic analysis of solar sail deployment," ISTS 2009-c-32, presented at the 27th International Symposium on Space Technology and Science (ISTS), Tsukuba, Ibaraki, Japan, July 2009.
  • R. Kloepper, H. Sakamoto, and M. Okuma, "Experimental identification of rigid body inertia properties using low-frequency unbalance excitation," AIAA 2009-2530, 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Material Conference, Palm Springs, CA, USA, 4-7 May 2009. (Presentation canceled due to swine flu)
  • H. Sakamoto, Y. Miyazaki, and O. Mori, "Transient dynamic analysis of gossamer appendage deployment using nonlinear finite element method," AIAA 2009-2170, 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Material Conference, Palm Springs, CA, USA, 4-7 May 2009. (Presentation canceled due to swine flu)
  • M. Okuma and R. Kloepper, "Improvement of experimental spatial matrix identification by virtual measurement point concept," International Congress on Sound and Vibration (ICSV), Krakow, Poland, 2009.
  • 細矢直基, 反町仁, 梶原逸朗, 原口大輔, "レーザーを用いたインパルス加振実験法による振動計測（周波数応答関数測定の高精度化）," No. 604, Dynamics and Design Conference, 北海道札幌市, 2009年9月2-5日.
  • 坂本啓, 宮崎康行, 森治, 白澤洋次, "有限要素法によるIKAROSセイル一次展開の動解析,"第25 回 宇宙構造・材料シンポジウム, No. B1, 神奈川県相模原市, 2009年12月4日.
  • 大久保博志, 田中宏明, 池田忠繁, 山田良平, 岩田稔, 岡部洋二, 坂本啓, （他13名）, "大気球を用いた超高精度スマート構造システムの実証試験計画," 平成21年度大気球シンポジウム, 神奈川県相模原市, 2009年10月2日.
  • D. Haraguchi, H. Sakamoto, and M. Okuma, "Dynamic analysis and control of spin deployable gossamer space structures," presented at the 5th TokyoTech-POSTECH-KNU Joint Workshop on Mechanical Engineering, Sept. 30, 2009.
  • Y. Okada, N. Ozawa, S. Dutta, H. Akita, H. Matsumoto, and A. Honda, "Cansat project part 2: Reliability analysis and project management," presented at the 5th TokyoTech-POSTECH-KNU Joint Workshop on Mechanical Engineering, Sept. 30, 2009.
  • N. Ozawa, S. Dutta, H. Akita, Y. Okada, A. Honda, and H. Matsumoto, "Cansat project part 1: Design and results of the cansat mission imitating extraterrestrial exploration," presented at the 5th TokyoTech-POSTECH-KNU Joint Workshop on Mechanical Engineering, Sept. 30, 2009.
  • 岡田侑樹, 秋田啓人, Soumya Dutta, 松本裕貴, 本田瑛人, 小澤直樹, 原口大輔, 坂本啓, "Cansatの信頼性解析と開発マネジメント," 8th University Space Engineering Consortium Workshop, 神奈川県横浜市, 2009年11月28-29日. （UNISON賞 第2位）
Back to top

2008

Journal Publications

  • Y. Sabah, M. Okuma, and M. Okubo, "Implementation of single and multiple adaptive step-size algorithm to ANC," Journal of Vibration and Acoustics, Transaction of ASME, Vol. 130, No. 1, Feb. 2008.
  • M. Rusli and M. Okuma, "Squeal noise prediction in dry contact sliding systems by means of experimental spatial matrix identification," JSME International Journal of System Design and Dynamics, Vol. 2, No. 2, 2008, pp. 585-595.
  • J. Y. Jeon and M. Okuma, "An optimum embossment of rectangular section in panel to minimize noise power," ASME Transactions, Journal of Vibration and Acoustics, Vol. 130, No. 2, Apr. 2008.
Back to top

Books

  • R. A. Ibrahim, V. I. Babitsky and M. Okuma, ed., Lecture Notes in Applied and Computational Mechanics, Vol. 44, Springer, 2009.
Back to top

Presentations

  • 高橋真史, 内山敏夫, 梶原逸朗, 有坂寿洋, "HDDにおけるサーボの高性能化を目指したスマート構造の最適設計," No. 219, Dynamics and Design Conference, 神奈川県横浜市, 2008年9月2-5日.
  • 高橋真史, 梶原逸朗, 有坂寿洋, "HDDにおけるヘッド機構のスマート構造化と最適設計,"第8回最適化シンポジウム2008 (OPTIS2008), 東京都目黒区, No. 08-35, 2008年11月, pp. 241-246.
  • 中野孝亮, 小幡倫世, 梶原逸朗, "レーザーによるマイクロ移動体の遠隔制御とエネルギー伝送," No. 518, Dynamics and Design Conference, 神奈川県横浜市, 2008年9月2-5日.
  • M. Okuma and S. Shayan Amin, "A straightforward algorithm for the acquisition of appropriate set of FRFs by hammering test for modal analysis," presented at 2nd International Conference on Vibro-Impact Systems, Sanya, Haina Province, P. R. China, Jan. 6-9, 2010.
  • N. Ishizuka, T. Okada, T. Ikeno, K. Shiomi, and M. Okuma, "Prediction method of vibration and noise regarding mechanical systems by means of experimental modeling," presented at International Conference on Computational and? Experimental Engineering and Sciences (ICCES2008), Honolulu, Hawaii, USA, Mar. 7-22, 2008.
  • R. Kloepper and M. Okuma, "Accurate rigid body property identification based on low-frequency FRF data," presented at International Conference on Computational and? Experimental Engineering and Sciences (ICCES2008), Honolulu, Hawaii, USA, Mar. 7-22, 2008.
  • A. Oba and Y. Fujii, and M. Okuma, "New evolutionary method for simultaneous structural strength and dynamics optimization," presented at International Conference on Computational and Experimental Engineering and Sciences (ICCES2008), Honolulu, Hawaii, USA, Mar. 7-22, 2008.
  • R. Kloepper and M. Okuma, "Increased accuracy of residual-inertia-based rigid body identification through direct fitting of inertia parameters to FRF data," International Conference on Noise and Vibration Engineering (ISMA), Leuven, Belgium, Sept. 15-17, 2008.
  • S. Shayan Amin, M. Okuma, and K. Yamamoto, "A robust algorithm to identify efficient driving points in experimental modal testing," International Conference on Noise and Vibration Engineering (ISMA), Leuven, Belgium, Sept. 15-17, 2008.
  • H. Sakamoto, "Geometrically nonlinear analyses of wave propagation in non-uniformly pre-tensioned membranes," ISTS 2008-c-12, presented at 26th International Symposium on Space Technology and Science (ISTS), Hamamatsu, Shizuoka, Japan, June 2008.
  • N. Okuizumi, H. Sakamoto, A. Kitajima, and M. Sugita, "Centrifugal deployment experiments of a square-shaped solar sail membrane," #A-5, presented at 18th Workshop on JAXA Astrodynamics and Flight Mechanics, Sagamihara, Kanagawa, Japan, July 2008.
  • 岡田侑樹, 赤城弘樹, "2008年度の東工大動設計学研究室の活動報告," 7th University Space Engineering Consortium Workshop, 秋田県秋田市, 2009年11月22-23日.　（ポスター発表）
  • 木佐允彦, 川久保学, 赤城弘樹, 岡田侑樹, 原口大輔, 水沼慎太郎, "月面における微小天体2次散乱物の調査計画," 第16回衛星設計コンテスト（アイデア部門）, 2008年11月2日. （受賞：「日本機械学会宇宙工学部門表彰フロンティアの部」および「最優秀模型賞」）
Back to top

Invited Lectures

  • M. Okuma, "Low frequency noise and vibration analysis of boat based on experiment-based substructure modeling and synthesis," Proceedings of International Symposium on Vibro-Impact Dynamics of Ocean Systems and Related Problems, Oct. 2-3, 2008.
  • H. Sakamoto, "Dynamics design of membrane space structures," Keynote speech at the 4th TokyoTech-POSTECH-KNU Joint Workshop on Mechanical Engineering, Oct. 24, 2008.
  • 坂本啓,「宇宙へとどけ！～大学・高専生による模擬衛星コンテストについて」, 国立科学博物館展示会「日本の先端科学技術の紹介」（日本機械学会主催）, 2008年8月7日.
Back to top

2007

Journal Publications

  • T. Otsuka, T. Okada, T. Ikeno, K. Shiomi, and M. Okuma, "Force identification of an outboard engine by experimental means of linear structural modeling and equivalent force transformation," Journal of Sound and Vibration, Vol. 308, 2007, pp. 541-547.
  • M. Rusli and M. Okuma, "Effect of surface topography on mode-coupling model of dry contact sliding systems," Journal of Sound and Vibration, Vol. 308, pp. 721-734, 2007.
Back to top

Books

  • 東工大機械科学科（大熊政明, 中原健志）, 「機械工学のための数学II」, 朝倉書店, ISBN978-4-254-11635-9 C3341, 2007.
Back to top
(List for 2007 is incomplete.)